Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

Can anyone clarify if I can put a 100w h7 bulb in my galaxy instead of the norm 55w. The new 'brighter/bluer' bulbs appear to come marked with a temperature rating of between 5000k to 8000k. What does this mean? as I have plastic lens covers can I get away with the larger wattage bulb. :huh:

The reason I would like to change them is I live in a rural area and the farmers take great delight in leaving 2" of crud over the road and when this is sprayed on to your headlights its like driving with glow worms. :lol:

Posted

You can't fit 100w bulbs because they are not street legal.

 

The higher wattage bulb would also draw extra current, almost twice as much, which may permanently damage the vehicle wiring.

 

I've got Philips Vision Plus fitted and they are very good. They are also filtered so the plastic lens won't turn yellow.

 

You can find out all about them here http://www.powerbulbs.co.uk/

 

When changing the bulbs you will find it a lot easier to remove the headlight as it's almost impossible otherwise. There are two screws at the top of the light, with plastic caps on, and one screw down each side of the light (do not remove these just slacken off a couple of turns). You will need a long stardrive screwdriver.

 

Hope this helps.

Posted

Chromedome - Have to disagree, removing the lamps is MUCH more work! Changed my original bulbs for Osram Silver Star when I first ot the car - 5 mins tops... Then changed them again when I fitted the HID kit - an hour tops, still quicker than taking the lamps out, plus no problems with alignment after refitting!

 

Mike

Posted

There must be more space under the diesel bonnet than my 2.3 petrol, honest there's no room to move.

 

Is the HID the xenon lamp upgrade and how easy is it? I thought you needed self levelling suspension, etc.

Posted

Yes, it's the genuine Xenon upgrade, no "dodgy" xenon type bulbs.. Integrated Ballast and starter, no cheap external starter or lamps on delay....

 

UK construction and use requires self levelling and washers for HID, but mine passed it's first MOT last month with no problems, and tbh, if there was a prob, it's a 5 min job to remove the actual lamps and replace with H7's leaving all the rest intact, until you get around the corner and another 5 mins...... I can supply the Techone H7kit with 8000k lamps (or 6000k if you prefer (too yellow)) for

Posted

Here's a pic of my Mums' Alfa after fitting 1/2 of the kit - see if you can tell which lamp is yet to be changed...

 

 

http://img74.exs.cx/img74/4953/mycarhidvh78pg.jpg

 

 

Mike

Posted
my local poundland is selling bulb kits for a pound :lol: thats right a quid five bulbs in the kit h/light b/light i/light r/light interior light and 2 fuses so i bought ten hows that for value.same kit in halfreuds nearly a tenner at that price i dont care wot bulbs are fitted
Guest blatters
Posted
my local poundland is selling bulb kits for a pound  thats right a quid five bulbs in the kit h/light b/light i/light r/light interior light and 2 fuses so i bought ten hows that for value.same kit in halfreuds nearly a tenner at that price i dont care wot bulbs are fitted

 

Tip!

 

Don't forget to take a torch with you to shine ahead as you may need it - what a bargain you have found!

 

Blatters. :lol:

Posted
its cheaper to buy the bulb kits then the batterys for the torch :(
Posted

Just ordered some HID's.

 

I think all the electronics,etc will fit inside the headlight assembly on my Mk2 so hopefully will be straight forward to fit.

 

I'll post my results soon.

Posted
Chromedome - Have to disagree, removing the lamps is MUCH more work! Changed my original bulbs for Osram Silver Star when I first ot the car - 5 mins tops... Then changed them again when I fitted the HID kit - an hour tops, still quicker than taking the lamps out, plus no problems with alignment after refitting!

 

Mike

Yet another fault with my Alhambra - my headlamp bulb failed on the way home.

 

I read this post recently, so after a quick re-read of the post to confirm it was a simple job, I nipped to Halfords and got two "Super brilliance" Xenon bulbs (two for the price of one offer :rolleyes: ) for

Posted
continued in next post...

 

The wonderful TDi diesel, is there less room around the petrol version?

http://img160.exs.cx/img160/2165/pict00348bj.jpg

 

Now let's do the offside headlamp...

http://img160.exs.cx/img160/5469/pict00352od.jpg

 

Dust cover is removed by unscrewing two plastic "wingscrews".

http://img160.exs.cx/img160/2218/pict00367qv.jpg

 

The space on this side is a bit more restricted.

http://img160.exs.cx/img160/3028/pict00371qw.jpg

 

The headlamp rear cover removed, lift off the washer filler cap to make removal easier.

http://img160.exs.cx/img160/3015/pict00384tg.jpg

 

Wayhey! All done!

http://img160.exs.cx/img160/7803/pict00407zi.jpg

 

Job finished in around 25 minutes.

http://img160.exs.cx/img160/6001/pict00429pd.jpg

 

 

Hope this helps anyone wondering if they should do it themselves or let the stealers do it. Handbook states - dealer replacement - ahh!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...